Article description:
ZigBee 3.0 WiFi Bridge
Already flashed with the latest German Tasmota firmware.
Sonoff ZigBee Bridge is the heart of the smart home. It enables you to manage a variety of ZigBee devices and sensors for surveillance and control purposes of the house.
The bridge can be connected to intelligent switches, temperature and humidity sensors, motion sensors, wireless door/window sensors and water sensors that are certified by the ZigBee Alliance.
Long-distance cigbee signal transmission with up to 80m range (without obstacles) covers almost your entire home.
Choose between the ZigBee2Tasmota variant (MQTT) or Home Assistant (ZHA).
Both variants have the same firmware and differ only in the pre -configuration.
A change to the other mode is possible at any time.
ZigBee2tasmota (mqtt)
This variant communicates via the MQTT protocol with your MQTT -compatible Home Atutomation System. The devices are set up directly via the consists in the webgui.
Run this command in the Tasmota console to apply the template:
Backlog Template {"NAME":"Sonoff ZBBridge","GPIO":[56,165,0,166,215,0,0,0,0,158,0,0,17],"FLAG":0,"BASE":18}; Module 0
Home Assistant (ZHA)
This variant creates a TCP bridge from the ZigBee module to the Home Assistant. In this case, Tasmota only leads all the news from the ZigBee module to the ZHA. In this mode you can not use ZigBee commands in the Tasmota console. All settings must be made via the ZHA integration of Home Assistant.
Run this command in the Tasmota console to apply the template and the required rule in a single command:
Backlog Template {"NAME":"Sonoff ZHABridge","GPIO":[56,208,0,209,59,58,0,0,0,0,0,0,17],"FLAG":0,"BASE":18,"CMND":"Rule1 on system#boot do TCPStart 8888 endon"} ; Rule1 1; Module 0
You can change 8888 to a port you prefer.
Technical data:
Model: M08020700017
Tigbee type: IEEE 802.15.4 2.4GHz ZigBee 3.0
Wi-Fi type: IEEE 802.11 B/g/n 2.4GHz
Security protocol: WEP/WPA-PSK/WPA2-PSK
Size: 62 x 62 x 20 mm
Weight: 42g
Work temperature: -10 ° C - 40 ° C
Job moisture: 5% - 90%
Input voltage: 5V micro USB, power supply is not included
Material: PC V0
