Article description DS18B20:
DS18B20 temperature sensor in various versions
Available either as a probe or as a single sensor.
The probe uses a new DS18B20 temperature sensor chip. Each pin of the chip is separated by a shrink tube to prevent short circuits. This version is waterproof and is self-sufficient for interior and exterior inserts.
Suitable for your Arduino or Raspberry Pi projects. Also very suitable for Sonoff Smart Switches. Among others for Sonoff TH10 / TH16 with 2.5mm jack connection, or e.g. Sonoff Basic via GPIO, Shelly and Shelly Plus series with Tempo Addon, Uva.
The resolution can be set from 9-12 bits to optimize speed or accuracy. Wide temperature range -55 ° C - 125 ° C
A notice:
A 4.7 KOHM resistance or a suitable adapter Shield is always required for operation to Raspberry Pi or Arduino.
1 Wire Adapter Shield for DS18B20
Suitable ADPTER to connect the DS18B20 Sensor to Raspberry Pi or Arduino. Without cumbersome soldering or working with Breadboards.
Completed with resistors, LED diode and the right PIN connections.
Also suitable for other 1 wire sensors or components.
Technical data DS18B20 Sensor:
Model: DS18B20
Type: waterproof temperature sensor
Feeler: stainless steel temperature sensor
Size of the stainless steel jacket: 6 x 30mm
Temperature measuring range: -55 ° C -125 ° C
Accuracy over the range of -10 ° C - 85 ° C: ± 0.5 ° C
Adjustable resolution: 9 - 12 bit
Voltage supply: 3.0 - 5.5V
Cable allocation: yellow (signal/data) - red (voltage supply/VCC) - black (mass/gnd)
Lengths: 1m / 2m / 3m / 5m / 10m
Further information:
Additional:
Brand newimmediately available
Model variants:
1m probe with 3 pin 2.54mm connection1m probe with 2.5mm jack connection1m probe with 3 pin 2.54mm connection1m-10m probe with 3-pin wire connectionOnly sensorAdapter Shield
