Unitec EIM-213 Wireless smoke detector Sonoff RF BridgeR2 WiFi RF Smart Hub Tasmota 14

Article description Wireless smoke detector:

Wireless smoke detector

Safety for your home - Certified according to DIN EN 14604:2005 / AC: 2008

Wireless Interconnection of Multiple Smoke Alarms - With the wireless function of the smoke alarm, you can connect up to 15 detectors of the same series wirelessly. If one of the interconnected smoke alarms triggers, it alerts the entire network. This ensures that all occupants in the house are alerted, even across multiple floors and greater distances. The wireless range is 20 meters, allowing you to flexibly install your detectors.

Convenient Silence Function When Cooking - The smoke alarm emits an 85 dB alarm in case of smoke detection. However, if the smoke alarm has detected smoke and entered alarm mode, you can silence the alarm for approximately 10 minutes by pressing the test button. This is particularly convenient when the alarm is accidentally triggered during cooking. For example, you can finish cooking your burgers in peace without being accompanied by a continuous alarm tone. Afterward, the alarm returns to normal operation mode.

Manual and Automatic Test Function for Your Personal Safety - Every 30 - 40 seconds, the smoke alarm performs an automatic function test. You can recognize this by the flashing LED light. However, you can also manually test its function at any time using the test function. We recommend testing the smoke alarm manually at least once every 3 months.

Acoustic and Visual Indication When Battery Needs Replacement - The smoke alarm takes care of checking the battery for you. Once the battery is depleted, the alarm announces this with a recurring beep. Two AA batteries are included in the package for immediate use after purchase.

Compatible with Sonoff RF BridgeR2 with Tasmota: With the help of the Sonoff RF BridgeR2, you can easily integrate your smoke detectors into your smart home system, making them intelligent. The RF Bridge is capable of detecting RF codes when an alarm is triggered and forwarding them via MQTT. Through this integration, you can seamlessly incorporate your smoke detectors into your smart home setup and reap the benefits of a connected system.

Functionality of the Smoke Detectors: The smoke detectors emit an alarm signal in the event of smoke detection. Each smoke detector has an individual code that can be received by the Sonoff RF Bridge and processed further via MQTT.

Receiving the Smoke Detector Codes: To obtain the code of a smoke detector in the Sonoff RF Bridge, simply press the test button on the smoke detector for 5 seconds to simulate an alarm. This will make the code visible in the WebGui of the RF Bridge. Once you have obtained the code of the respective smoke detector, you can process it as needed via MQTT. (Note: The smoke detectors only transmit a code during an alarm, not during low battery status.)

Compatible with Home Assistant: The RF Bridge connects to Home Assistant via MQTT and sends the detected RF codes to your Home Assistant MQTT broker. In the configuration.yaml file, you create MQTT binary sensors, assign them names, and provide the corresponding RF codes. You can display these manually created sensors on the dashboard and set up additional automations.

Features:

Triggers an alarm of >85 dB in case of smoke detection

Interconnection of up to 15 alarms possible

Wireless range > 20 meters

Convenient silence function

LED function indicator to ensure functionality

Acoustic and visual indication when battery replacement is necessary

Manual test function for your personal safety

Two AA batteries included in the package

Supplied with dowels, screws, and user manual

---

Help to attach your smoke detector can be found in the supplied instruction manual. If you want to avoid drilling and dowling in the ceiling, you can immediately order the magnetic assembly set.

---

Article description RF BridgeR2:

Sonoff 433MHz RF WiFi Bridge

Already flashed with the latest Tasmota firmware.

 

RF433,92MHz and Wi-Fi Protocol Support Helps you connect 433,92MHz RF devices with Wi-Fi devices and expand the smart home ecosystem.

 

 

Strong Connectivity, Limitless Possibilities - The bridge supports adding up to 64 RF 433,92MHz devices released by SONOFF, such as the PIR3-RF PIR motion sensor and the DW2-RF wireless door/window sensor, making your home smarter.

 

 

Additional Device Types - The bridge also recognizes signals from 433.92MHz smoke detectors, 433.92MHz door magnet sensors, 433.92MHz human body IR motion sensors, 433.92MHz water sensors, and many other 433.92MHz sensors. The requirement is that these devices operate with a code such as PT2260, PT2262, PT2264, or EV1527. However, rolling codes and dynamic codes, such as those used in garage door openers, roller shutters, and curtain controls, are not supported.

 

 

Compatible with 433,92MHz Remote Controllers & Easy Management - If you have dozens of RF433,92MHz devices and are having trouble controlling them, this RF BridgeR2 will help you organize everything. Just migrate the devices to your smartphone. It is compatible with 433,92MHz remote controllers for easier control. You can add up to 16 devices and up to 64 buttons.

 

 

RF Alarm & Trigger Smart Scenes - You can add alarms to trigger the device by setting up a smart scene. For example, once the door is opened (in conjunction with the DW2 door/window sensor), you will receive a notification and the lights will turn on automatically.

 

---

NO PORTISCH OPTION

This was only possible with the old black variant, which is no longer available on the market.

---

Technical data Wireless smoke detector:

Brand: Unitec EIM-213

Removal of the radio connection:> 20 m

Radio networking: 433.92MHz

Networkable: yes (radio)

Operating principle: optical

Current voltage: 3 volts

Battery included: Yes (2x 1.5V DC AA alkaline)

Warning display with low battery voltage: Yes

Alarm Volume dB): 85

Test switch: Yes

Protection class (IP): IP20

Operating temperature (° C): +4 ° C to +38 ° C

Diameter: 120x35.5 mm

Assembly: wireless

Mute switch: Yes / silent switch time about 10 minutes

Scope of delivery: Radio Smoke Detector, assembly accessories, batteries, instructions for use

Certification: DIN EN 14604:2005 / AC: 2008

Technical data assembly set:

Magnetic assembly pads

56mm diameter

High quality 3M glue pad

1 min. Fast installation without drilling

Technical data Sonoff RF2 Bridge:

Model: RF Bridger2

Wi-Fi type: IEEE 802.11 B/g/n 2.4GHz

Security protocol: WEP/WPA-PSK/WPA2-PSK

Size: 62 x 62 x 20 mm

Weight: 39g

Work temperature: -10 ° C - 40 ° C

Input voltage: 5V micro USB, power supply is not included

Material: PC V0

Further information:

Additional:

Brand new immediately available With Tasmota firmware

Set variants:

1x Smoke Detector/ Optional with adhesive pads + Sonoff RF2 Bridge 3x Smoke Detector/ Optional with adhesive pads + Sonoff RF2 Bridge 5x Smoke Detector/ Optional with adhesive pads + Sonoff RF2 Bridge 7x Smoke Detector/ Optional with adhesive pads + Sonoff RF2 Bridge 10x Smoke Detector/ Optional with adhesive pads + Sonoff RF2 Bridge Sonoff RF2 Bridge without smoke detectors

RF Bridge Firmware variants:

Tasmota German Tasmota English Tasmota Individual Language (Send us a Message)