Article description ESP-07:
ESP-7 ESP8266 Wireless Transceiver Module
Already flashed with the latest Tasmota firmware..
The ESP-07 is a small and powerful WiFi module that allows you to easily integrate your projects into your WiFi network.
This small chip allows you to program your own IoT projects. Or you can use the numerous example libraries you can find on the Internet.
Bring your projects online. The module can be used very well with Arduino, Raspberry Pi, Tasmota, or many other projects.
Article description 6 dbi antenna:
6dbi WLAN antenna
Amplify the signal from various WLAN routers such as Fritz!Box, Linksys, Belkin, Netgear, D-Link, Buffalo, Asus, and many more.
Other possible uses:
- Model airplane remote control
Technical data ESP-07:
Model.: ESP-07
Microchip: ESP8266
Wi-Fi Type: IEEE 802.11 b/g/n 2.4GHz
+20dBm output power in 802.11b mode
Security protocols: WEP/WPA-PSK/WPA2-PSK
Size: 21.1 x 16 x 3 mm
Weight: approx. 1.5g
SPI flash size: 1MB
Working temperature: -40°C - 125°C
Input voltage: 3.0 - 3.6V (Recommended 3.3V)
Interfaces: UART/HSPI/I2C/I2S/IR Remote Control/GPIO/PWM
average working current: 80mA
WakeUp and packet dispatch: < 2ms
Power consumption in deep sleep: <10uA
Standby power consumption < 1.0mA
Power-off leakage current: < 5uA
Technical data 6dbi antenna:
Frequency: 2.4Ghz + 5Ghz
Gain: 5-6dBi / Impedance: 50 Ohm
Total length: 195mm (foldable antenna)
Frequency range: Omnidirectional
Common port: SMA
Range: 1-70m
Technical Specification: Signal Coaxial SMA Cable
SMA cable material: RG1.13 cable
Device connection: IPEX/U.FL/MHF1
Cable length: 35cm
New goods available immediately with Tasmota firmware
Set variants
1x ESP-07 + antenna 3x ESP-07 + antenna 1x ESP-07 without antenna 3x ESP-07 without antenna 5x ESP-07 without antenna
Firmware variants
Tasmota german Original (without firmware)
