Shelly 1PM Gen3 16A DC-AC Power Metering opt. Plus Addon & DS18B20 Temp Sensor

Article description Shelly 1PM Gen3:

Flush WiFi Smart Switch with power consumption measurement

The Shelly 1PM Gen3 is a compact, smart WiFi switch with integrated power measurement. It allows remote control of electrical devices via a mobile phone, tablet, PC, or home automation system. The device can operate independently in a local WiFi network or be controlled via cloud home automation services.

Compared to its predecessor, the Shelly 1PM Gen3 features a better processor and expanded memory, resulting in higher speed and more stable performance. The device can be monitored, controlled, and configured remotely as long as it is connected to a WiFi router and the Internet.

The Shelly 1PM Gen3 is suitable for retrofitting into standard flush-mounted boxes, behind power sockets, light switches, or in other places with limited space. The device has an integrated web interface, allowing users to monitor, control, and configure it.

Use Cases:

Appliance Control: Use the Shelly 1PM Gen3 to remotely control and automate various electrical devices such as lights, fans, or other appliances.

Power Monitoring: Monitor the power consumption of connected devices in real-time. This helps understand energy consumption patterns and improve energy efficiency.

Home Automation: Integrate the Shelly 1PM Gen3 into your home automation system to create individual scenarios and schedules for your devices.

Energy Efficiency: Use the power measurement feature to identify energy-hungry devices and make informed decisions to improve energy efficiency in your home.

Remote Monitoring: Keep an eye on your devices even when you're not at home. Thanks to the remote access function, you can control and monitor connected devices from anywhere with an internet connection.

Article description Shelly Plus Addon:

Addon for Shelly Plus series

This addon is compatible with Shelly Plus 1, Shelly Plus 1PM, Shelly Plus 2pm, Shelly Plus I4, Shelly Plus I4DC

Can be used with up to five DS18B20 sensors or a DHT22 sensor

Has an analog and a digital input

Relaxed the measured temperatures, the previously created scenes can carry out certain actions.

Precise measurement and control - Shelly Plus add -on is a galvanically separate sensor interface for all Shelly Plus Relays. Use the add-on to measure temperature and humidity via its 1-wire connections or combine various analogous and digital sensors for complex automation and higher efficiency.

Highly compatible-the Shelly Plus add-on is compatible with most Arduino sensors! Use the digital or analog inputs to measure the desired parameters and create complex automation scenes based on the sensor data.

Control of the garage door-you can connect a reed switch sensor to the digital sensor of the Shelly Plus add-on and track the status of your garage door. In this way you always know whether it is open or closed and can react accordingly.

Article description DS18B20 Sensor:

DS18B20 temperature sensor

The probe uses a new DS18B20 temperature sensor chip. Each pin of the chip is separated by a shrink tube to prevent short circuits. This version is waterproof and is self-sufficient for interior and exterior inserts.

Suitable for your Shelly temperature sensor or Arduino, Raspberry Pi projects.

The sensor supports a wide temperature range from -55 ° C to 125 ° C

There are 5 cable lengths to choose from: 1m - 3m - 5m - 10m

Technical data Shelly 1PM Gen3:

Device Name: Shelly 1PM Gen3

WiFi Standard: IEEE 802.11 b/g/n (2.4 GHz)

Bluetooth: Version 4.2 with BLE support

Range: Up to 30 m indoors, up to 50 m outdoors (depending on conditions)

Dimensions: 37 x 42 x 16 mm

Weight: 27 g

Maximum Terminal Torque: 0.4 Nm / 3.5 lbin

Wire Cross-Section: 0.2 to 2.5 mm²

Mounting: Wall console or flush-mounted box

Housing Material: Plastic, Color: Red

Operating Temperature: -20°C to 40°C

Humidity: 30% to 70% relative humidity

Power Supply: 110-240 V AC or 24-30 V DC

Maximum Switching Current: 16 A (at 240 V AC), 10 A (at 30 V DC)

Standby Power Consumption: <1.2 W

Switching Channels: 1

Power Measurement: Yes

Protection Features: Overheating, overvoltage, overcurrent, overload

Supported Load Types:Resistive (e.g., heaters, incandescent bulbs), Capacitive (e.g., electronic devices, capacitor banks), Inductive (e.g., LED drivers, motors, transformers)

MQTT Support: Yes

Technical data Shelly Plus Addon:

Size: 37 x 42 x 15 mm

Weight: 105g

Supply voltage DC: 3.3 V (from Shelly Plus device)

Performance recording: <0.5 W (without sensors)

VCC Max. Strength: 10 MA

VREF OUT MAX. Strength: 1 MA

Support the following devices: Shelly Plus 1/1PM, Shelly Plus 2pm, Shelly Plus I4/I4DC

Temperature display: Depending on the sensors DS18B20 or DHT22

Display of the humidity: depending on the DHT22 sensor

Digital input: -15 V to 0.5 V (true) / 2.5 V to 15 V (wrong)*

Analog entrance area: 0 to 100%

Registration swell analog input: 1%**

Voltmeter range: 0 to 10 V

Threshold for the message of the voltmeter: 0.1 V **

Accuracy analog input/voltmeter Better than 5%

Technical data DS18B20 Sensor:

Model: DS18B20

Type: waterproof temperature sensor

Feeler: stainless steel temperature sensor

Size of the stainless steel jacket: 6 x 30mm

Temperature measuring range: -55 ° C -125 ° C

Accuracy over the range of -10 ° C - 85 ° C: ± 0.5 ° C

Adjustable resolution: 9 - 12 bit

Voltage supply: 3.0 - 5.5V

Cable allocation: yellow (signal/data) - red (voltage supply/VCC) - black (mass/gnd)

Cable length: Yes of your choice 1m - 10m

Further information:

Additional:

Set variants: