SP511E WIFI RGB WS281X DUAL LED Controller with Remote DC 5-24V WLED Tasmota 14

Article description:

Dual LED WiFi controller with remote control

Already flashed with the latest WLED or Tasmota firmware.

With this small and compact controller you can control your WS 2811, 2812, 2815, SK6812 light tubes.

The LED controller is able to control 3 color channels. Red - Green - Blue

Two LED strips can be connected to the dual output. The color control is the same on both outputs regardless of the firmware.

You can also conveniently control the LED controller with the 38-button infrared remote control.

With the WLED or Tasmota firmware and the MQTT protocol you can easily integrate the controller into home automation systems. This means that all imaginable switching and control options are available to you.

---

Special features of the WLED firmware:

Features:

Integrated WS2812FX library for over 100 special effects

FastLED noise effects and 50 palettes

Modern user interface with color, effect and segment control

Segments for Setting different effects and colors for parts of the LEDs

Settings page - configuration via the network

Access point and station mode - automatic fail-safe AP

Support for RGBW strips

Up to 250 user preSets for easy saving and loading of colors/effects, supports cycling through them.

Preferences can be used to automatically execute API calls

Night light function (dimmes gradually)

Full OTA software update capability (HTTP + ArduinoOTA), password protected

Configurable analog clock + support for Diamex Cronixie kit

Configurable automatic brightness limitation for safer operation

File system based configuration for easy backup of preferences and Settings

---

WLED Firmware Specifications:

WLED SoundReactive firmware specially adapted for the SP511E which supports the built-in microphone.

The 38-key remote control is already installed with the appropriate 38-key-ir.json

Firmware language is only available in English.

It is possible to connect WLED with home automation systems and other third-party software. You can use any API that WLED provides (JSON, HTTP, UDP, MQTT), JSON is preferred

Direct support in Home Assistant.

---

Note:

The voltage required depends on the LED strips used. For example, do not use a DC12V power supply for DC5V WS2812B stripes.

In the Tasmota version, the following buttons are pre-programmed on the remote control via rules: power, main colors and dimming function. All other keys can be freely assigned additional functions. This also applies to the 2 additional buttons on the LED controller.

---

Technical data:

Model No.: SP511e Dual

Wi-Fi Type: IEEE 802.11 b/g/n 2.4GHz

Security protocols: WEP/WPA-PSK/WPA2-PSK

Input voltage: DC 5V-24V

Max. Input current: 6A

Working temperature: -20°C - 60°C

Supported IC: WS2811 / WS2812B etc., all Single Data Smart IC chipSets

Output: 3 color channels can be used

Integrated microphone

Connection Type: 2x 3 PIN connection

Size LED controller: approx. 60 x 30 x 14mm

Size of remote control: approx. 125 x 56 x 7.5mm

Battery remote control: 3V CR2025 or CR2032 (Not included)

New goods available immediately with WLED or Tasmota firmware

Model variants:

WLED SoundReactive Tasmota english Tasmota individual language (send us a message) FairyNest (no Tasmota)