WD01-ADE WiFi Smart Dual Irrigation Pump Watering System Tasmota 14
WD01-ADE WiFi Smart Dual Irrigation Pump Watering System Tasmota 14
Out of stock
Couldn't load pickup availability
Article description:
WiFi Smart Dual Irrigation Pump
Already flashed with the latest Tasmota firmware.
The WD01 is an intelligent double irrigation pump with an integrated WiFi chip. You don't need a tap to operate, just a water tank or bottle to get water. You can Set schedules for watering your house and balcony plants, flowers, etc.
You can schedule watering for every day of the week or Set it on a loop (e.g. turn on a 5-minute drip irrigation every 12 hours) to fully automate watering your home.
It is an integrated solution consisting of a relay and 2 independent irrigation pumps, the irrigation input is connected to one or two water tanks or bottles.
The product includes a complete Set of components for your home irrigation:
- Comes with transparent and flexible water hoses to connect the water containers (not included) to the pumps and the pumps to the plants
- T-piece pipe adapter
- Drip arrows that are inserted into the ground to attach the irrigation pipes and direct the water from the irrigation pipe directly to the roots of the plants, making irrigation even more efficient.
Before Setting up a regular watering system, you should do some tests to determine your plants' watering needs and calculate the size of the water balloon required.
It is an irrigation system for domestic use and is not suitable for large-scale irrigation or continuous operation.
In the packaging there is a power adapter cable (approx. 100 cm) with a USB plug, which you can connect to your own 5 V DC power source or to a notebook or power bank.
According to the manufacturer, the device can also be operated with batteries. This requires 4 AA batteries under a cover on the bottom, but this should only be seen as a backup solution as the battery consumption is high.
It is an indoor product, it should not be used outdoors, it is not weatherproof.
Technical data:
Model: WD01-ADE
Wi-Fi Type: IEEE 802.11 b/g/n 2.4GHz
Security protocols: WEP/WPA-PSK/WPA2-PSK
Size: 83 x 83 x 95 mm
Weight: 818g
Pump performance: 0.3-0.8 liters per minute
Suction: ≥ 2 m
It is recommended to place the water container relatively low to the plants so that the water in the bucket does not flow directly into the flower pot without starting the pump.
Stroke: ≥ 2.5m
Input voltage: 5V DC (2A)
Scope of delivery:
WiFi irrigation pump
1 meter USB cable
Flexible tube: 15m
Drip arrows: 20 pieces
T-pieces: 20 pieces
2x filters for water intake
1x screwdriver
More information:
More:
New goods available immediately with Tasmota firmware
Firmware languages:
Tasmota german eWeLink (Original)
WiFi Smart Dual Irrigation Pump
Already flashed with the latest Tasmota firmware.
The WD01 is an intelligent double irrigation pump with an integrated WiFi chip. You don't need a tap to operate, just a water tank or bottle to get water. You can Set schedules for watering your house and balcony plants, flowers, etc.
You can schedule watering for every day of the week or Set it on a loop (e.g. turn on a 5-minute drip irrigation every 12 hours) to fully automate watering your home.
It is an integrated solution consisting of a relay and 2 independent irrigation pumps, the irrigation input is connected to one or two water tanks or bottles.
The product includes a complete Set of components for your home irrigation:
- Comes with transparent and flexible water hoses to connect the water containers (not included) to the pumps and the pumps to the plants
- T-piece pipe adapter
- Drip arrows that are inserted into the ground to attach the irrigation pipes and direct the water from the irrigation pipe directly to the roots of the plants, making irrigation even more efficient.
Before Setting up a regular watering system, you should do some tests to determine your plants' watering needs and calculate the size of the water balloon required.
It is an irrigation system for domestic use and is not suitable for large-scale irrigation or continuous operation.
In the packaging there is a power adapter cable (approx. 100 cm) with a USB plug, which you can connect to your own 5 V DC power source or to a notebook or power bank.
According to the manufacturer, the device can also be operated with batteries. This requires 4 AA batteries under a cover on the bottom, but this should only be seen as a backup solution as the battery consumption is high.
It is an indoor product, it should not be used outdoors, it is not weatherproof.
Model: WD01-ADE
Wi-Fi Type: IEEE 802.11 b/g/n 2.4GHz
Security protocols: WEP/WPA-PSK/WPA2-PSK
Size: 83 x 83 x 95 mm
Weight: 818g
Pump performance: 0.3-0.8 liters per minute
Suction: ≥ 2 m
It is recommended to place the water container relatively low to the plants so that the water in the bucket does not flow directly into the flower pot without starting the pump.
Stroke: ≥ 2.5m
Input voltage: 5V DC (2A)
WiFi irrigation pump
1 meter USB cable
Flexible tube: 15m
Drip arrows: 20 pieces
T-pieces: 20 pieces
2x filters for water intake
1x screwdriver
More:
New goods available immediately with Tasmota firmware
Firmware languages:
Tasmota german eWeLink (Original)
!WICHTIGER HINWEIS VOR DEM KAUF!
Tasmota ist ein leistungsstarkes Werkzeug für dein Smart Home System, das dir hilft, dein Zuhause noch intelligenter zu machen.
Wenn du bereit bist, dich mit der Technik auseinanderzusetzen und Neues zu lernen, dann eröffnen sich dir großartige Möglichkeiten, insbesondere in Verbindung mit MQTT, um dein Smart Home noch flexibler und effizienter zu steuern.
ENTFESSELE UNENDLICHE MÖGLICHKEITEN MIT TASMOTA & MQTT
Tasmota ist cloudfrei, schnell & sicher.
Tasmota bietet eine große Sicherheit, da die Daten im heimischen Netzwerk verbleiben
Keine Kommunikation nach außen! (Keine Verbindung zu China Servern nötig)
Mehr Funktionen (Home Assistant, ioBroker, openHAB, FHEM, NodeRed, Domoticz, SmartThings und viele mehr)
MQTT Anbindung
Eigenständige Geräte, die individuell gesteuert werden können
Schnellere Reaktionszeiten
Alexa-Integration ohne Skill
Die offiziellen Apps wie eWeLink/Gosund/Smart Life/Tuya, etc. (über China Server) funktionieren mit Tasmota-Firmware nicht mehr.
Hinweis bei der Varianten-Auswahl „Tasmota“
Mit dem Kauf der Variante „Tasmota“ stimmst du zu, dass das Gerät auf deinen Wunsch hin von uns geflasht wird. Dabei wird die originale Hersteller-Firmware gelöscht und durch die cloudfreie Open-Source-Firmware Tasmota ersetzt.
Ausnahme: Dies gilt nicht für Varianten, die bereits mit Tasmota vorgeflasht sind oder ab Werk mit Tasmota ausgestattet werden. Diese Produkte werden direkt vom Hersteller mit der Tasmota-Firmware ausgeliefert.
Hier erfährst du, warum Smart Home mit Tasmota Firmware besser ist.
Split
˅ Manufacturer
Schöneberger Str. 75d
22149 Hamburg
Germany
contact@mediarath.de
˅ Responsible Person
Schöneberger Str. 75d
22149 Hamburg
Germany
contact@mediarath.de
€5 coupon code* for newsletter registration
Register now for free and find out more about promotions, products and innovations.
*The coupon can be redeemed once on the entire first order with a total purchase value of €50 or more.