Unitec EIM-213 wireless smoke detector Sonoff RF BridgeR2 WiFi RF Smart Hub Tasmota 14

Article description radio smoke alarm:

Radio smoke alarm

Security for your home - Tested according to DIN EN 14604:2005 / AC: 2008

Wireless connection of multiple smoke detectors - The radio function of the smoke detector allows you to wirelessly connect up to 15 detectors of the same series with each other. If one of the networked smoke detectors goes off, it alerts the entire network. This way you can ensure that everyone in the house is alerted, even across multiple floors and greater distances. The wireless range is 20 meters, so you can attach your detectors flexibly.

Practical mute function when frying food - The smoke alarm triggers an alarm of 85 dB if smoke develops. However, if the smoke alarm has detected smoke and switched to alarm mode, you can silence the alarm for approximately 10 minutes by pressing the test button. This is particularly useful if the alarm was accidentally triggered while cooking. For example, you can finish frying your burgers in peace without being accompanied by a constant beep. The detector then switches back to normal operating mode.

Manual and automatic test function for your personal safety - Every 30 - 40 seconds the smoke detector carries out an automatic function test. You can see this by the flashing LED light. Of course, you can also check its function manually at any time. You can use the check function for this. We recommend testing the smoke alarm manually at least once every 3 months.

Audible and visual indication when the battery is used up - The smoke detector checks the battery for you. As soon as the battery is used up, the alarm announces this with a recurring beep. Two Type AA batteries are included in the scope of delivery for use immediately after purchase.

Compatible with Sonoff RF BridgeR2 with Tasmota: With the help of the Sonoff RF BridgeR2 you can easily integrate your smoke detectors into your smart home system and thus make them intelligent. The RF Bridge is able to recognize the RF codes when an alarm is triggered and forward them via MQTT. This integration allows you to seamlessly integrate your smoke detectors into your smart home Setup and benefit from the advantages of a connected system.

How the smoke detectors work: The smoke detectors send out an alarm signal in the event of an alarm. Each smoke detector has an individual code that can be received by the Sonoff RF Bridge and further processed via MQTT.

Obtaining the smoke detector code: To obtain the code of a smoke detector in the Sonoff RF Bridge, simply press the test button on the smoke detector for 5 seconds to simulate an alarm. This will make the code visible in the RF Bridge's WebGui. Once you have received the code for the corresponding smoke detector, you can process it as you wish via MQTT. (Note: The smoke detectors only send a code in the event of an alarm, but not when the battery is low.)

Compatible with Home Assistant: The RF Bridge connects to Home Assistant via MQTT and sends the detected RF codes to the MQTT broker of your Home Assistant system. In the configuration.yaml you create MQTT binary sensors, give them a name and assign them the corresponding RF code. You can display these manually created sensors in the dashboard and use them to create further automations.

Features:

Triggers an alarm of >85 dB if smoke develops

Connection of up to 15 detectors possible

Wireless range > 20 meters

Practical mute function

LED function display to ensure functionality

Acoustic and visual indication when the battery needs to be changed

Manual check function for your personal safety

Two AA batteries included in delivery

With dowels and screws + operating instructions

---

You can find help with installing your smoke detector in the included instructions manual. If you want to avoid drilling and doweling into the ceiling, you can order the magnet mounting Set at the same time.

---

Article description RF BridgeR2:

Sonoff 433MHz RF WiFi Bridge

Already flashed with the latest Tasmota firmware.

RF433.92MHz and Wi-Fi Protocol Support -Helps you connect 433.92MHz RF devices to Wi-Fi devices and expand the smart home ecosystem.

Strong Connectivity, Limitless Possibilities -The bridge supports adding up to 64 RF 433.92MHz devices released by SONOFF, such as PIR3-RF PIR motion sensor and DW2-RF wireless door/window sensor, to make your home smarter.

Additional device Types - The bridge also detects signals from 433.92MHz smoke detectors, 433.92MHz door magnetic sensors, 433.92MHz human body IR motion sensors, 433.92MHz water sensors and many other 433.92MHz sensors. The prerequisite is that these devices work with a code such as PT2260, PT2262, PT2264 or EV1527. However, rolling codes and dynamic codes, such as those used in garage door openers, roller shutters and curtain controls, are not supported.

Compatible with 433.92MHz remote controls & Easy Management -If you have dozens of RF433.92MHz devices and are having trouble controlling them, this RF BridgeR2 will help you get organized. Simply migrate the devices to your smartphone. Compatible with 433.92MHz remote controls for easier control. You can add up to 16 devices and up to 64 buttons.

RF Alarm & Trigger Smart Scenes -You can add alarms to trigger the device by Setting up a Smart Scene. For example, as soon as the door is opened (in conjunction with the DW2 door/window sensor), you will receive a notification and the lights will automatically turn on.

---

NO PORTIC POSSIBILITY

This was only possible with the old black version, which is no longer on the market.

---

Technical data radio smoke alarm:

Manufacturer: Unitec EIM-213

Distance of radio connection: > 20 m

Radio networking: 433.92MHz

Networkable: Yes (radio)

Operating principle: optical

Voltage: 3 volts

Battery included: Yes (2x 1.5V DC AA alkaline)

Low battery warning indicator: Yes

Alarm volume (dB): 85

Test switch: Yes

Protection rating (IP): IP20

Operating temperature (°C): +4°C to +38°C

Diameter: 120x35.5 mm

Mounting: Wireless

Mute switch: Yes / Mute time about 10 minutes

Scope of delivery: radio smoke detector, mounting accessories, batteries, instructions for use

Certification: DIN EN 14604:2005 / AC: 2008

Technical data mounting Set:

magnetic mounting pads

56mm diameter

high quality 3M adhesive pad

1 min. Quick installation without drilling

Technical data Sonoff RF2 Bridge:

Model: RF BridgeR2

Wi-Fi Type: IEEE 802.11 b/g/n 2.4GHz

Security protocols: WEP/WPA-PSK/WPA2-PSK

Size: 62 x 62 x 20 mm

Weight: 39g

Working temperature: -10°C - 40°C

Input voltage: 5V Micro USB, power supply is not included

Material: PC V0

More information:

More:

New goods available immediately with Tasmota firmware

Set variants:

1x radio smoke detector/ optionally with adhesive pads + Sonoff RF2 Bridge 3x radio smoke detectors/ optionally with adhesive pads + Sonoff RF2 Bridge 5x radio smoke detectors/ optionally with adhesive pads + Sonoff RF2 Bridge 7x radio smoke detectors/ optionally with adhesive pads + Sonoff RF2 Bridge 10x radio smoke detectors/ optionally with adhesive pads + Sonoff RF2 Bridge Sonoff RF2 Bridge without smoke detector

RF Bridge firmware variants:

Tasmota german Tasmota English Tasmota individual language (send us a message)