SP511E WiFi RGB WS281X DUAL LED Controller with Remote DC 5-24V WLED Tasmota

Article description:

Dual LED WiFi controller with remote control

Optionally already flashed with the latest WLED or Tasmota firmware.

With this small and compact controller you can control your WS 2811, 2812, 2815, SK6812 light hoses.

The LED controller is able to control 3 color channels. Red - green - blue

Two LED stripes can be connected to the dual output. The color control is the same regardless of the firmware on both outputs.

You can also conveniently control the LED controller with the 38 buttons infrared remote control.

With the WLED or Tasmota Firmware and the MQTT protocol you can wonderfully integrate the controller into Home Automation systems. As a result, all conceivable switching and control options are available.

Special features of the WLED firmware:

Features:

Integrated WS2812FX library for over 100 special effects

Fast Led Rush effects and 50 pallets

Modern user interface with color, effect and segment control

Sngements for adjusting various effects and colors for parts of the LEDs

Settings page - configuration via the network

Access point and station mode - automatic fail -safe AP

Support for RGBW stripes

Up to 250 user presets for easy storage and loading colors/effects, supports this.

Pre-settings can be used to automatically carry out API calls

Night light function (dimensions gradually)

Complete OTA software update capacity (HTTP + Arduinoota), password-protected

Configurable analog clock + support for the cronixie kit from Diameax

Configurable automatic brightness limitation for safer operation

File system-based configuration for easy backup of presets and settings

Firmware specifications:

WLED SoundReactive firmware that supports the built -in microphone especially for the SP511E.

The 38 keys remote control is already incorporated with the appropriate 38-key-Ir.json

Firmware language is only available in English.

It is possible to connect WLED with home automation systems and other software from third -party providers. You can use any API that provides WLED (JSON, HTTP, UDP, MQTT), JSON is preferred

Direct support in Home Assistant.

A notice:

The voltage required depends on the LED stripes used. For example, do not use DC12V power supply for DC5V WS2812B stripes.

In the TASMATA variant, the following keys on Rules are inevitable in the remote control: power, main colors and dimming function. All other buttons can be freely covered with other functions. This also applies to the 2 additional buttons on the LED controller.

Technical data:

Model No.: SP511E Dual

Wi-Fi type: IEEE 802.11 B/g/n 2.4GHz

Security protocol: WEP/WPA-PSK/WPA2-PSK

Input voltage: DC 5V-24V

Max. Input current: 6a

Work temperature: -20 ° C - 60 ° C

Supported IC: WS2811 / WS2812B etc., All single data smart ic chip sets

Exit: 3 color channels can be used

Microphone integrated

Connection type: 2x 3 PIN connection

Size LED controller: approx. 60 x 30 x 14mm

Size remote control: approx. 125 x 56 x 7.5mm

Battery remote control: 3V CR2025 or CR2032 (not included in the scope of delivery)

Further information:

Additional:

Model variants:

WLED SoundReactive